Roving Networks WIFLY GSX Manual do Utilizador descarregar pdf (Página 89)

www.rovingnetworks.com Version 1.0r 9/21/2012 89

RN-WIFLYCR-UM

Command

Default

Description

set wlan auth <value>

Sets the authentication mode.

set wlan channel <value> <flag>

Sets the WLAN channel, where <value> is a decimal number from 1 to

13 representing a fixed channel and <flag> is the optional character i

(meaning immediate).

set wlan ext_antenna <value>

Determines which antenna is active, where <value> is 0 (use the chip

antenna) or 1 (use the U.FL connector).

set wlan join <value>

1|0

Sets the policy for automatically associating with network access

points.

set wlan hide <value>

Hides the WEP key and WPA passphrase, where <value> is 0 or 1.

set wlan key <value>

Not applicable

Sets the 128-bit WEP key, where <va lue> is EXACTLY 26 ASCII

chars (13 bytes) in hex without the preceding 0x.

set wlan linkmon <value>

0 (disabled)

Sets the link monitor timeout threshold, where <value> is a decimal

number representing the number of failed scans before the module

declares AP is Lost and de-authenticates.

set wlan mask <mask>

0x1FFF (all

channels)

Sets the WLAN channel mask, which is used for scanning channels

with auto-join policy 1 or 2).

set wlan phrase <string>

rubygirl

Sets the passphrase for WPA and WPA2 security modes.

set wlan rate <value>

Sets the wireless data rate.

set wlan ssid <string>

roving1

Sets the SSID with which the module associates.

set wlan tx <value>

Sets the Wi-Fi transmit power, where <value> is a decimal number

from 1 to 12 that corresponds to 1 to 12 dBm.

Table 33. get Commands

Command

Description

get adhoc

Displays the ad hoc settings.

get broadcast

Displays the broadcast UPD address, port, and interval.

get com

Displays the communication settings.

get dns

Displays the DNS settings.

get everything

Displays all of the configuration settings, which is useful for debugging.

get ftp

Displays the FTP settings.

get ip <char>

Displays the IP address and port number settings, where <char> is the optional parameter a. Using

<char> returns the current IP address.

get mac

Displays the device’s MAC address.

get option

Displays the optional settings such as the device ID.

get sys

Displays the system settings, sleep and wake timers, etc.

get time

Displays the time server UDP address and port number.

get wlan

Displays the SSID, channel, and other WLAN settings.

get uart

Displays the UART settings.

ver

Displays the firmware version.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 95 96

Comentários a estes Manuais

Sem comentários

Roving Networks WIFLY GSX Manual do Utilizador Página 89

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Roving Networks WIFLY GSX