Roving Networks WIFLY GSX Manual do Utilizador descarregar pdf (Página 28)

www.rovingnetworks.com Version 1.0r 9/21/2012 28

RN-WIFLYCR-UM

set wlan auth <value>

This command sets the authentication mode, where <value> is shown in Table 11. You only need to set this

parameter if you are using automatic join mode 2, i.e., the set wlan join 2 command.

NOTE: During association the module interrogates the access point and automatically selects the authentication

mode.

The firmware supports he following security modes:

• WEP-64 and WEP-128 (open mode only, NOT shared mode)

• WPA2-PSK (AES only)

• WPA1-PSK (TKIP only)

• WPA-PSK mixed mode (some access points, not all are supported)

Table 11. set wlan auth Command Authentication Modes

Value

Authentication Mode

Open (Default)

WEP-128

WPA1

Mixed WPA1 and WPA2-PSK

WPA2-PSK

Not used

Ad hoc mode (join any ad hoc network)

WPE-64

Default: 0

Example: set wlan auth 4 // Use WPA2-PSK authentication

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 95 96

Sem comentários

Roving Networks WIFLY GSX Manual do Utilizador Página 28