Roving Networks WIFLY GSX Manual do Utilizador descarregar pdf (Página 80)

www.rovingnetworks.com Version 1.0r 9/21/2012 80

RN-WIFLYCR-UM

Using the Built-In Sensor Power

The modules contain an on-board sensor power pin, which is controlled by the set q sensor <mask> command. <mask> is

a bit mask value that determines which sensor pins to sample when sending data using the UDP broadcast packet or the

HTTP auto-sample function. See “set q sensor <mask>” on page 19 for more details.

NOTE: In versions of firmware prior to 2.23, this command is named set option sensor.

Firmware versions 2.23 and higher support the set q power <value> command. This command sets an 8-bit register with

two 4 bit nibbles that automatically turns on the sensor power. See “set q power <value>” on page 20 for more details on

using this command.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 95 96

Sem comentários

Roving Networks WIFLY GSX Manual do Utilizador Página 80